|
| |
|
|
| |
 |
|
| |
|
|
| |
FBs - Series Micro - Programmable Controller
|
|
| |
|
|
| |
|
|
| |
|
|
| |
- General Specifications
- 100 - 240VAC or 24VDC power supply
- 2DK words program capacity
- Max. 512 points of Digital I/O
- 3002 points of Internal Relay
- Real time clock for High - Performance models
- Built - in digital filter for Digital Input, time constants can be set from 270 nS - 15mS
- Window based programming software with run - time program editing capability
- 0.33. S / sequence instruction in average
- Tiny Memory pack for program and data storage
- 128 points of Analog I/O (12/14 - bit resolution)
- 19528 words of Date/File register
- 256 Counters and 256 Timers
High - Speed I/O Processing
- 4 sets of 32 - bit Hardware High - Speed counter with 8 operation modes (U/S, U/D x 2, K/R, K/R x 2, A/B, A/B x 2, A/B x 3, A/B x 4) counting frequency upto 920 KHz
- 4 points of 32 - bit software High - Speed Cyclic counter with 3 operation modes(U/D, K/R, A/B), total frequency up to 10KHz
- 5 sets of 0.1mS time - base High - Speed Timer (16 - bit x 1, 32 - bit x 4)
- 16 points / 32 kinds of external interrupt input
- 4 points of PWM output with 100 or 1000 resolution, frequency range from 72 - 18.432K Hz or 720 - 184.32K Hz respectively
Communication and Data Link
- Up to 5 communication ports(USB, Rs232, Rs485, Ethernet)max. speed up to 921.6Kbps
- Supports FATEK and MODBUS RTU / ASCII communication protocol, performs with Master or Slave role
- Supports FATEK TCP / UDP, MODBUS TCP communication protocol by optional Ethernet communication module
- Provides CPU link function which can link up to 254 PLCs directly or through Modern or Ethernet
- Universal ASCII / RTU communication function can be used for processing of generic communication protocols.
- Through Modem or Ethernet can perform the download, upload, diagnosis and control operation
Numeric Control and Positioning
- Max. 4 axes of pulse command output in one unit and pulse rate up to 920 KHz / 460KHz with 3 operation modes(U/D, K/R, A/B)
- Motion parameters can be changed dynamically
- Motion program can be uploaded / downloaded via HMI
- PLC +NC in one unit and ladder languages supports NC control program directly
- Multi - axis linear interpolation motion control
- Tracking or dynamically fixed length movement control
Temperature Measurement and Control
- Direct interface to 8 kinds of thermocouple(J, K, R, S, E, T, B, N) and Pt - 1000 RTD sensors
- Max. 32 loops of temperature measurement and PID control
Special I/O Module
- Dedicated 7/16 - segment LED display module for max. 96 Alphanumeric / 192 7 - seg Digits or 1024 LED Lamp displays
- Dedicated multiplex input module for 4 Digits x 8 (32 Digits) thumbwheel switch input or 128 independent switch input
- High density DC input or DC output module (24 points with 4 cm x 9 cm x 8 cm dimension)
|
|
| |
|
|
| |
|
|
|
