Ask for Kirloskar AC drives » Home
|
|
|||||||||||||||||||||||||
| |
| » Product Introduction |
| • Reaction time is counted by millisecond, the rotaitonal speed will be fixed in 3ms, and reaction time of the communication control function is 0.1ms. |
| • 160% min overloads torqure, 100% acceleration torque, 180% starting torque. |
| • Open loop control:supply 160% torque in whole frequency range. |
| • When load changes : maintain the best stability, speedy torque compensate. |
| • High precision in slip compensation<0.5% |
| • High output scanning time <0.003ms |
| • Analog input scanning time <3ms |
| • Brand-new soft-switching technology:du/dt can be controlled by it validly, reduce the sudden changeof voltage and can be matched with other standard motors. The motor cable can be used 300m (un-shield) or 150m (shield). |
| HC1- V provides you many option components, this will make equipment characteristic more complete. |
 |
||||
| » | HC1-V Provides you many option components, this will make equipment characteristic mor complete | ||||
| » 2 sets of DC reactor can restrain the producing of harmonic effectively and raise power element of inverters without extra power compensate equipment. <Optional> » RFI filter. <Optional> » Built-in standard two-string encoder input terminal. » Two standard series connection interface : one for Keypad and the other for RS485. » Provide many kinds of communication card for option. »Built-in PID control |
|||||
| » | LCP (Local Control Panel) make parameter setting easily. | ||||
» LCP can make a copy of parameter from one inverter to another freely and easily. |
|||||
| » | Characteristics and Function | ||||
| » Provide speed, torque and special electric machinery control mode. » ASFM will regulate carrier frequency automatically, improve efficiency,reduce noise according to the load condition and permit manual control when running. » AMA funtion measures crucial parameter in the static status, if the factory setting differs from the machinery, AMA function will ensure the performance of machinery torque to the best status. It can be used in the most sever application occasions. |
|||||
| Input/Output Characteristics | Mode HC1- | A | a | B | b | c | |||
» |
Input Voltage | 220V±15%/400V±15% | » | V2015 | 700 | 680 | 242 | 200 | 260 |
| » | Input Frequency | 50/60HZ±1% | » | V2020 | 800 | 780 | 308 | 270 | 269 |
| » | Output Voltage | 0-100% iNPUT Voltage | » | V2025 | |||||
| » | Output Frequency | 0-400HZ | » | V2030 | 740 | 720 | 242 | 180 | 260 |
| » | Efficiency | >0.98 | » | V2040 | |||||
| » | Overload | 150% | » | V2050 | * | 800 | * | 370 | 375 |
| Environmental Conditions | » | V4015 | 620 | 600 | 242 | 180 | 260 | ||
| » | Ambient Temperature | Max.50°C | » | V4020 | |||||
| » | Storage Temperature | -25°C-70°C | » | V4025 | 740 | 720 | 242 | 180 | 260 |
| » | Humidity | Under 95% | » | V4030 | |||||
| » | Altitude | 1000m | » | V4040 | 840 | 820 | 308 | 210 | 296 |
| » | Vibration | 0.7G | » | V4050 | |||||
| » | Enclosures | IP20 | » | V4060 | |||||
| I/O signal | » | V4075 | 840 | 820 | 370 | 240* | 355 | ||
| » | Digital Input | 24V DC (Ri=24K) | » | V4100 | |||||
| » | Analog Input(Voltage) | 0-±10V (Ri=10K) | » | V4125 | 1200* | 1180* | 420 | 280* | 373(+44)* |
| » | Analog Input(Current) | 0/4-20mA(Ri=200Ω) | » | V4150 | |||||
| » | DC Power Supply | 24V,200mA | » | V4175 | 1590* | 1540* | 420 | 280 | 373(+44)* |
| » | Analog Output | 0/4-20mA(Ri=500Ω) | » | V4215 | |||||
| » | Relay Output | 220V AC, 2A/25V DC,1A | *Please get informations of 160KW and upward from distributor. | ||||||
| » | RS-485 Communication | ||||||||
| Protective Function | |||||||||
| » | Ground Fault, Short Circuit, Over Heat | ||||||||
| » | Electronic thermal Overload | ||||||||
| » | Over Voltage, Under Voltage, Over Current | ||||||||
| » | Power-loss, Over load, Stall Prevention | ||||||||