|
|
AC Drives - True Genius TG-600 Ac Drives - Victor G1000 & 2000
» Down |
INTRODUCTION :
True Genius TG-600 series AC Drives are high preformance Vector controlled inverters, adopting modular design based o dual CPU control. Three types of control methodology are built into the drive software, which are selectable through parameters, based on the application requirement, viz., V/f control, Sensor less Vector control and the Closed loop Vector contorl.
Closed loop Torque Control is easily achieved through using the PG card option to detect the motor speed and adjust the output torque in time according to the changing load demand.
Special featured of Automatic adjustment of Carrier frequency if enabled, ensures quiet operation by adjusting the carrier frequency automatically in accordance with the changing load and temperature.
|
| SELECTION CAHRT |
| Drive Model TG 600 |
P75 |
1P5 |
2P2 |
3P7 |
5P5 |
7P5 |
011 |
015 |
018 |
022 |
030 |
037 |
045 |
055 |
| Motor Output(KW) |
0.75 |
1.5 |
2.2 |
3.7 |
5.5 |
7.5 |
11 |
15 |
18.5 |
22 |
30 |
37 |
45 |
55 |
| Rated Current |
2.5 |
3.7 |
5 |
9 |
13 |
17 |
25 |
32 |
37 |
45 |
60 |
75 |
90 |
110 |
| Output KVA@ 415V |
1.8 |
2.6 |
3.6 |
6.5 |
9.3 |
12.2 |
18.0 |
23.0 |
26.6 |
32.3 |
43.0 |
54.0 |
64.6 |
79.0 |
| Nett Weight(kg) |
1.65 |
3.8 |
6.5 |
21 |
45 |
| Dimension(H*W*D) |
755*460*180 |
320*220*180 |
467*290*215 |
577*375*270 |
| Drive Model TG 600 |
075 |
090 |
110 |
132 |
160 |
185 |
200 |
220 |
250 |
280 |
315 |
350 |
400 |
500 |
560 |
630 |
| Motor Output(KW) |
75 |
90 |
110 |
132 |
160 |
185 |
200 |
220 |
250 |
280 |
315 |
350 |
400 |
500 |
560 |
630 |
| Rated Current |
150 |
1769 |
210 |
250 |
300 |
340 |
380 |
415 |
470 |
520 |
600 |
640 |
690 |
860 |
950 |
1100 |
| Output KVA@ 415V |
108.0 |
126.5 |
151.0 |
180.0 |
215.6 |
244.4 |
273.0 |
298.3 |
337.8 |
337.8 |
431.2 |
460.0 |
496.0 |
618.0 |
683.0 |
791.0 |
| Nett Weight(kg) |
75 |
150 |
220 |
650 |
| Dimension(H*W*D) |
755*460*330 |
1180*490*390 |
1264*750*400 |
1471*1505*400 |
|
FEATURES
» SIMPLEPCLROGRAMMING
Ensures 16 step speed control, without the usage of Multi-step speed programming.
» PID CONTROL
Precise control of the application in accordance with the changing load/output pattern.
» MOTORAUTO TUNNING
Ensures precise acceleration and deceleration for applications like lifts, elecators etc.
» S-CURVE
Ensures smooth acceleration and deceleration for applications like lifts, elevators etc.
» MULTIPLE V/F CURVE SETTING
Enables to suit the drive for various applications both constant torque & variable torque, employing only V/f Control. |
» AVR FUNCTION
Whenever this function is enabled, the drive output voltage does not change in accordance with the input voltage or DC Bus voltage and is maintained constant within the output capacity range.
» ENERGY SAVING
Whenever this function is enabled, the drive will adjust the output voltage in accordance with the load by detecting the output load current thereby saving Energy automatically (fan and pump loads).
» PARAMETER COPY
This enable uploading/downloading of parameters to external LCD display unit thereby reducing the commissioning time taken for identical machines.
» SERIAL COMMUNICATION
Standard RS-485 communication with MODBus RTU protocol as option. |
TECHNICAL SPECIFICATION » Up
| Input |
Input Voltage Range |
3 Phase, 415V AC |
| Input Frequency Range |
47-63 Hz |
| Output |
Output Voltage Range |
3 phase, 415V AC (Same as input voltage) |
| Out Frequency Range |
0-600 Hz |
| External Interface |
Programmable Digital Input |
Six Channel inputs. One is the high-speed pulse input (HDI1). Another four channel inputs can be extended by optional I/O card |
| Programmable Analog Input |
AI1; 0~10V, AI2; 0~10V or 0~mA, optional I/O extension card can offer another two inputs; AI3; 10V~10V, AI4; 0~10V or 0~20mA. |
| Progrmmable Open Circuit Collector Output |
One channel output, I/O extension card can offer another one (Open circuit collector output or high-speed pulse output). |
| Relay Output |
Two channel outputs, optional I/O extension card can offer another one |
| Analog Output |
One Channel output, optional I/O extension card can offer another one, 0/4~20mA or 0/2~10V selectable. |
| Technology Features |
Control Mode |
Sensorless Vector Control, Vector Control with PG, V/f Control. |
| Overload Capacity |
150% rated current for 60 sec.200% rated current for 2 sec, (Vector control) |
| Starting Torque |
Sensorless Vector Control:0.5Hz / 150%, Vector Control : OHz/180% |
| Speed - Adjust Ration |
Sensorless Vector Control:1:100, Vector Control with PG:1:1000 |
| Speed Accuracy |
Sensorless Vector Control:±0.5% of maximum speed, Vector Control : ± 0.02% of maximum speed. |
| Carrier Frequency |
1.0KH~16.0 KHz. It can be adjusted automatically according to the features of temperature and load. |
| Function Features |
Frequency - Setting Mode : Digital Setting, Analog Setting, Pulse Frequency setting, Serial Communication Setting, Multi-Speed, Simple PLC Setting etc. The switch between the defining combination and the defining mode can be realized. |
| Torque-Control Function offers multimode torque setting. |
| PID Control Function offers precise process control |
| Simple PLC & Multi-segments Speed Control Function offers 16 segment speed Control. |
| Travers Control Function |
| Length and Time Control Function. |
| Non-Stop Function while instantaneous power failure. |
| Speed trance Function (Catch-on fly) offers smooth start of the running motor. |
| QUICK / JOG Function offers Multi-function shorcut key defined by user. |
| Automatic Voltage Adjust Function offers to maintain the output voltage constant automatically when mains voltage fluctuating. |
| Up to 29 functions for failure protection offers protection against Over current, over voltage, under voltage, over temperature, input / output phase failure, drive/motor load, IGBT failure, etc |
|
» Up » Back » Next |
